Spec Sheets

Water Dealer Specifications


Parts, Connectors: Clack Bypass

Culligan, Hague and Erie bypasses

ICC-ES-PMG-logo


We recommend the use of Dow 111 or similar, non-toxic silicone based lubricant on washers for all installations.

Note: Manufacturer assumes no responsibility for failure due to improper installation.

Caution: When connecting to a copper male adaptor or brass nipple, make sure to file any sharp edges which may contact and damage washer causing leaks.
Model # Description Length
SWCN11434 1 – 1/4″ Nylon FIP x 3/4″ brass FIP 15″, 18″, 24″
SWCN1141″ 1 – 1/4″ Nylon FIP x 1″ brass FIP 12″, 15″, 18″, 24″
SWC-114 1 – 1/4″ brass FIP x 1 1/4″ brass FIP 18″, 24″
Designed and manufactured specifically to save time & money on the installation without reducing the flow!
Compliance / Listings
  • ICC-ES PMG
  • ICC Listed, Tested & Certified
  • UPC, IPC, IMC, IRC USA
  • Low Lead Compliant CA Health & Safety Code 116875
  • ASME A112.18.6/CSA B125.6-2009 compliant
  • NSF-61 (ICC-ES PMG Certified to ANSI/NSF sec 9)
  • Additional listings: State of Wisconsin, Commonwealth of Massachusetts, City of Los Angeles
Specifications

Furnish and install Corrugated Stainless Steel Full Port Water Softener Connectors

  • DESIGN FEATURES: Mega-flow SUPER Water-flexTM
  • 304 Series Stainless Steel
  • No reduction necessary for easiest installation
  • Flows approx 135% more than braided type   ? based on straight tube mathematical calculations at 60psi and 17.57 fps water velocity
  • Maintains optimum flow – no restriction
  • Operate appliance at maximum efficiency
  • Kink and Crimp Free
  • Chrome plated brass nuts
  • DuPont Zytel Nylon nut  NSF listed
  • Extremely Flexible
  • Will not corrode or rust
  • No Dielectric union required
  • Highest Quality EPDM washer
  • Resists work hardening
  • Working pressure 200 psi
  • Burst pressure 1800+ psi
  • 100% Leak Tested
  • No Sweat Installation
  • Lifetime Guarantee
  • Temperature rating 40 – 250 degrees F
  • Custom Design – Installs Direct from Appliance to Supply line
Contact Us

We're not around right now. But you can send us an email and we'll get back to you, asap.

Start typing and press Enter to search