Water Dealer Specifications


Parts, Connectors:

Hague, Culligan and Erie bypasses


We recommend the use of Dow 111 or similar, non-toxic silicone based lubricant on washers for all installations.

Note: Manufacturer assumes no responsibility for failure due to improper installation.

ICC-ES-PMG-logo

Caution: When connecting to a copper male adaptor or brass nipple, make sure to file any sharp edges which may contact and damage washer causing leaks.
Model # Description Length
SWCN1141 *1 1/4″ nylon FIP x 1″ FIP 1″ tube with Hague 1 1/4″ FIP x 1″ FIP 12″, 15″, 18″, 24″
SWCN11434 *1 1/4″ nylon FIP x 3/4″ FIP 3/4″ tube with Hague 1 1/4″ FIP x 3/4″ FIP 15″, 18″, 24″
SWC-114 * 1 1/4″ brass FIP x 1 1/4″ brass FIP 1 1/4″ tube with Hague 1 1/4″ FIP x 1 1/4″ FIP 18″, 24″
*Special Hague 1 1/4 FIP nut is 6mm longer to correctly fit the Hague Water max bypass.   Designed and manufactured specifically to save time & money on the installation without reducing the flow!
Compliance / Listings
  • ICC-ES PMG
  • ICC Listed, Tested & Certified
  • UPC, IPC, IMC, IRC USA
  • Low Lead Compliant CA Health & Safety Code 116875
  • ASME A112.18.6/CSA B125.6-2009 compliant
  • NSF-61 (ICC-ES PMG Certified to ANSI/NSF sec 9)
  • Additional listings: State of Wisconsin, Commonwealth of Massachusetts, City of Los Angeles
Specifications

Furnish and install Corrugated Stainless Steel Full Port Water Softener Connectors

  • DESIGN FEATURES: Mega-flow SUPER Water-flexTM
  • 304 Series Stainless Steel
  • No reduction necessary for easiest installation
  • Flows approx 135% more than braided type  ?based on straight tube mathematical calculations at 60psi and 17.57 fps water velocity
  • Maintains optimum flow – no restriction
  • Operate appliance at maximum efficiency
  • Kink and Crimp Free
  • Chrome plated brass nuts
  • DuPont Zytel Nylon nut  NSF listed
  • Extremely Flexible
  • Will not corrode or rust
  • No Dielectric union required
  • Highest Quality EPDM washer
  • Resists work hardening
  • Working pressure 200 psi
  • Burst pressure 1800+ psi
  • 100% Leak Tested
  • No Sweat Installation
  • Lifetime Guarantee
  • Temperature rating 40 – 250 degrees F
  • Custom Design – Installs Direct from Appliance to Supply line